some of our products in this category
Eickhorn KM4000
by Eickhorn
excl. VAT + shipping
#53825130
Eickhorn KM4000 by Eickhorn
The new KM4000 offers additional functions in relation to the advanced KM3000: wire cutter and back saw. It also features a new tanto blade design and a glass breaker at the end of the handle. Fiberglass enforced synthetic handle. Blade made of 55Si7 spring steel, with black Kalgard coating against corrosion. Synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Eickhorn S.E.K. II G-10
by Eickhorn
excl. VAT + shipping
#53825140
Eickhorn S.E.K. II G-10 by Eickhorn
Single-Edge version of the extraordinary successful S.E.K., with Spear-Point blade and reinforced blade back. Blade of Böhler N695 steel with dull finish. G-10 rough grip handle. Comes in Kydex sheath. Overall length 21,5 cm. Blade length 10 cm. Blade thickness 5 mm. Weight 140 g.
Neck Knife 40408
by Haller
excl. VAT + shipping
#605819
Neck Knife 40408 by Haller
The blade is 420 stainless steel and comes fully through to the end of the handle.
The riveted handle is made of plastic. The Kydex sheath has a ball chain made of metal.
The idea of ​​a Neck Knife is simple. A knife with a sheath that you can hang around your neck. So the knife is independent to wear a belt or pocket and anytime ready for access.
This results in specific requirements of the knife:
- It must be easy, for hanging around your neck you can feel every gram of unnecessary
- It must be securely seated in the vagina, since it hanging upside down in the vagina
- It must at the same time can be drawn without much force required, as you could otherwise injure themselves
Therefore, especially Kydex sheaths have prevailed with a click or snap lock in this area. The weight in each case including vagina.
Mini survival knives
by Haller
excl. VAT + shipping
#604800
Mini survival knives by Haller
Double knife in a sheath with a keychain.
Neck Knife 80442
by Haller
excl. VAT + shipping
#606006
Neck Knife 80442 by Haller
The single-edged dagger-shaped blade made of 420 stainless steel, the handle is made of non-slip rubber. The Kydex sheath has a ball chain made of metal.
The idea of ​​a Neck Knife is simple. A knife with a sheath that you can hang around your neck. So the knife is independent to wear a belt or pocket and anytime ready for access.
This results in specific requirements of the knife:
- It must be easy, for hanging around your neck you can feel every gram of unnecessary
- It must be securely seated in the vagina, since it hanging upside down in the vagina
- It must at the same time can be drawn without much force required, as you could otherwise injure themselves
Therefore, especially Kydex sheaths have prevailed with a click or snap lock in this area. The weight in each case including vagina.
Smith & Wesson USA - Bush Hog ...
by Smith & Wesson
excl. VAT + shipping
#604938
Smith & Wesson USA - Bush Hog Kukri by Smith & Wesson
The blades are made of powder-coated 440C stainless steel.
A very large Kukrimesser with strong blade. The rubberised grip fits securely in your hand. With strong Cordura sheath.
Made in China.
excl. VAT + shipping
#603466
Airspeed
The blades of the lockable pocket knife are made of stainless steel. The Griffbeschalungen are hardwood.
Sheath knife with wooden handle and scabbard.
Inexpensive knife.
Made in Pakistan.
Military & Police MP6 handle g ...
by Smith & Wesson
excl. VAT + shipping
#6010192
Military & Police MP6 handle gray / black by Smith & Wesson
Pocket knife with patented spring-assisted opening mechanism and locking lever. The blade is made of 4034 stainless steel. Locking takes classic to a liner lock.
The handle is made of light metal with clip.
BlackField carrier F22 drop po ...
by BlackField
excl. VAT + shipping
#6010362
BlackField carrier F22 drop point blade by BlackField
Survival knives with coated blade, 1070-high-carbon steel (not stainless). Various bits are inserted into the screw-on hollow metal handle.
The Nylon Sheath has a plastic holder for mounting of the blade, as well as a front pocket.
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Outdoor IV
by Haller
excl. VAT + shipping
#602497
Outdoor IV by Haller
Haller Outdoor Serie
Hier besticht besonders die elegante, etwas schmaler gehaltene Klinge mit der am Klingenrücken angeschliffenen Facette. Die helle Messingparierstange und der Griffabschluß stehen in einem harmonischen Kontrast zu der schwarzen Kunststoffbeschalung.
Die Klinen sind aus 420er rostfreiem Stahl und besitzen einen feinen Hohlschliff für besonders lange Schnitthaltigkeit. (Aufgrund des Hohlschliffs, diese Messer bitte nicht zum Hacken verwenden.)
Alle Messer haben zum Schutz der Hand eine kräftige Metallpapierstange. Zu jedem Messer gehört eine Leder-Gürtelscheide.
Hergestellt in Spanien.
Haller Tanto Neck Knife
by Haller
excl. VAT + shipping
#603119
Haller Tanto Neck Knife by Haller
Neck Knives
Blade length 75 mm, overall length 175 mm
A Neck Knife is always useful if the traditional ways a knife with him to wear is not feasible. This problem also occurs at the sport. Obviously you have a knife in such certain requirements: it must be easy, it must be flat, it should not apply too much and also it should be handy. A skeletal knife with black coated Tanto blade made of 420 stainless steel. With only 68 grams, it is very easy. On the blade is fully through a black plastic wrap upset. The Tanto Neck Knife is distinguished with a Kydex whistle delivered.
excl. VAT + shipping
#603516
Knife 81524
Fahrtenmesser
Blade made of 420 stainless steel and black scabbard.
Manufactured in Pakistan.
messer+dolche taschenmesser travellermesser fahrtenmesser camping survival freizeitmesser survivalmesser pfadfindermesser
Knife 61678
by Haller
excl. VAT + shipping
#603531
Knife 61678 by Haller
Freizeitmesser
Blade made of 420 stainless steel
Handle made of non-slip plastic.
With the saw blade back on
and with plastic sheath.
Made in Spain.
knives+knifes+daggers camping travellerknife
excl. VAT + shipping
#603595
Gurkha 81209
Militär-Gurkhamesser
Original military Gurkha knife with 2 small by knives.
Strong carbon steel blade.
Handle scales made of hardwood.
Including the Leather Sheath.
Rustic design.
Manufactured in India.
messer+dolche bowie travellermesser fahrtenmesser jagdmesser camping survival smith+wesson hersteller+serie freizeitmesser outdoor tactical knife knives taktische taktisches messer einsatzmesser kukri khukri ghurka gurka gurkha machete buschmesser
excl. VAT + shipping
#603602
Survival knife 30754
Survivalmesser
Survival knives with compass and many accessories with blade stainless Stahl.Mit metal handle and Leather Sheath with sharpening stone.
Manufactured in Taiwan.
knives+knifes+daggers travellerknife camping survival
Aitor 64601
by Aitor
excl. VAT + shipping
#603607
Aitor 64601 by Aitor
Skinner JK I
Full stainless steel, bottle and can opener and screwdriver. A practical little storage bag is included
Manufactured in Spain.
Aitor 64604
by Aitor
excl. VAT + shipping
#603608
Aitor 64604 by Aitor
Jungle King black
The stainless steel blade is made of chrome molybdenum vanadium steel, chrome black
and rock wave approved. The screw handle is made of metal.
A compass and various parent life utensils are in the handle.
In the plastic sheath is the 120 mm long Sioux JK II
as well as a centrifugal rubber inserted.
Manufactured in Spain.
knives+knifes+daggers travellerknife camping survival
Survival Knife
by Haller
excl. VAT + shipping
#605430
Survival Knife by Haller
Made in China.
Survival knives junior adventu ...
by Haller
excl. VAT + shipping
#606029
Survival knives junior adventurer Camo by Haller
A survival knives for teenagers with rounded safety tip.
The black-coated blade is made of 420 stainless steel, handle made of light alloy. The handle end cap is unscrewed, is inserted a compass. Survivalutensilien is located in the hollow handle.
Each knife is a Nylon Sheath.